Premium Capricorn TL Series PTFE Bowden Tubing for 3D Printers - High-Temperature Resistant, Low Friction Filament Guide - Perfect for Ender 3, CR-10, Prusa & More (1m/3.3ft) - Ideal for Smooth Printing & Reduced Clogs
$8.52
$15.5
-45% OFF
Free shipping on all orders over $50
7-15 days international
8 people viewing this product right now!
30-day free returns
Secure checkout
30784319
Guranteed safe checkout
Description
Capricorn's excellent quality translucent blue tubing. 2mm ID, 4mm OD diameter for 1.75mm filaments. Sold By Meter (e.g 1 piece =1 meter , 2 Pieces = 2 meter)
This blue translucent tubing is produced from the finest pure virgin transparent PTFE. Guaranteed to always be the right diameter and perfectly round.
Data Sheet
| Our Premium TL Series Light Blue Tubing | ||
| Additives | Blue Color | |
| Best For Chunky Filaments | YES | |
| Best For Flexible Filaments | NO | |
| Can See Through | YES | |
| Pulling Friction | 0.8 | |
| Color | Blue, Translucent | |
| Density (kg/m3) | 2100 +/-100 | |
| Hardness | 55 | |
| Inner Diameter (mm) | 2.05 +/- 0.05 | |
| Linear Thermal Expansion at 250 °C | 3.4-3.6% | |
| Material | Highest Quality Pure Virgin PTFE | |
| Melting Point (°C) | around 300 | |
| Outer Diameter | 3.95 +/- 0.05 | |
| Roundness (ϵ) | < 0.1 | |
| Stiffness | Medium | |
| Thermal Conductivity (W/m-k) | 0.25 | |
| Wear Rate (gm/s) | 0.01 | |
| Young's Modulus (GPa) | 0.5 |
| ♠Pulling Friction is calculated as the average force required to pull 1.2 meters of 1.75mm PLA filament through 1 meter of tubing at a constant speed, relative to 1 meter of cheap white reference tubing. Note that although we observed the friction of the TL series to be about the same or even slightly lower than our XS series, it also has a larger internal diameter. |
| §Other Bowden tubes may vary significantly in stiffness, depending on the material from which they're made. Our tubing generally tends to be more flexible than most, with the TL being more flexible than XS. |
| ¥Young's Modulus (YM) is the measure of elasticity of the material. Our XS Series additives give the PTFE a slightly greater YM than the TL Series. |
| ♥Temperatures were approximated by heating samples of all tubing simultaneously, observing how quickly each one began to deform. Printer failures may happen at significantly lower temperatures. |
| Printing high temperature materials may create dangerous off-gassing. Please refer to the |
Price for PTFE tubes are per meter.
