CARBONX™ Carbon Fiber PETG 3D Printer Filament - Black (1.75mm/2.85mm/3.00mm) for High-Strength Prints - Perfect for Automotive Parts, Drone Frames & Engineering Prototypes

CarbonX™ CFR Carbon Fiber Reinforced Co-Polyester Filament

Made in the USA using premium PETG and High-Modulus Carbon Fiber (not carbon powder or milled carbon fiber).  CarbonX™ CF-PETG is an improved CF reinforced 3D printing filament vs. the competition.  This filament is ideal for anyone that desires a structural component with high modulus, excellent surface quality, dimensional stability, light weight, and ease of printing.  

Print industrial-grade CF-PETG parts with Gearbox™ HT2 High-Temp 3D Printer. 

Carbon fiber reinforced filaments are abrasive and can wear out a brass or aluminum nozzle.  We recommend our A2 Hardened Steel Nozzles

Benefits of CarbonX™ CF-PETG include:

• Superior Chemical Resistance vs. ABS
• Amorphous:  Low and near isotropic shrinkage
• Low moisture absorption:  3X lower vs. ABS
• Very low odor emitted during printing
• Wide processing range:  230 - 270°C 

Chemical Resistance:  Unstressed tensile bars molded of PETG exhibit good resistance to dilute aqueous solutions of mineral acids, bases, salts, and soaps, and to aliphatic hydrocarbons, alcohols, and a variety of oils. Halogenated hydrocarbons, short chain length ketones, and aromatic hydrocarbons dissolve or swell the plastic. 

Recommended Print Conditions:

• Extruder:  Ideally 230 to 260°C
• Platform Temp:  70 to 90°C
• Platform Prep:  Clean glass w/ Kapton Tape, PVA-based glue, Hairspray
• Nozzle:  We currently recommend minimum 0.40mm orifice.  
• Layer Height:  Ideal layer height is 60% of nozzle diameter.  We do not recommend printing layers below 0.2mm with CF Grades.  
• Carbon fiber filament is more abrasive than unfilled materials, so extended use will result in more wear on your nozzle.